12 / 24v White LED Mini Side Marker Light

12 / 24v White LED Mini Side Marker Light

12 / 24v Amber White Back 10 LED Side Marker Light

12 / 24v Amber White Back 10 LED Side Marker Light

1x 12 / 24v White Flush Led Marker Light

  • Vibration and shock resistant.
  • Applicable on 12v and 24v systems.
  • LED Technology - Minimum Power Consumption.
  • ABS strengthened casing.
  • Fully Waterproof.
£7.99
Availability: In stock
SKU
BRA1003W

1x WHITE LED Light Flush fitting surface mount position light (Single) (applicable on 12v and 24v systems). These units have 2 LED lights and give a higher illumination than other similar units resulting in greater road safety. This is reliable longer lasting unit that is applicable for your 12 volt car, Van, Trailer or 4x4 as well as being popular as a Truck marker light 24 volt.

Please Note: Sales is for 1x White Flush LED Light. Do not confuse these with other similar units - the quality does not compare.

Boxed and complete with surface mount rubber seals x2 (one for curved surfaces and one for flat surfaces) , stainless steel allen key screws and blanking plugs for security purposes and anti-corrosion. These LED light units not only offer superb illumination but are also manufactured to a very high standard, are stylish and very easy on the eye.

Dimensions: Length - 79mm (hole to hole- 58 mm), Height - 22 mm, Depth 16mm, Protrusion on surface- 5mm, Slot Size - 45mm.

  • Vibration and shock resistant.
  • Applicable on 12v and 24v systems.
  • LED Technology - Minimum Power Consumption.
  • Operating power is 0.5 Watts
  • ABS strengthened casing.
  • Comes in WHITE.
  • Fully Waterproof.
  • Boxed and packaged for safe delivery.
  • Universal Installation.
  • Also included - Rubber seal x2, stainless steel fitting screw x2, Plastic caps for screw heads (prevent corrosion & theft).
  • 12 month warranty.
  • Email & Phone Technical support.

Can be used as flush fitting extra marker lights for your car, van, 4x4, truck light bar / bull bar / roll bar / side bars.

Marker lights are boxed, new and come complete for fitting.

VAT Invoice, Fitting Instructions and Tracking info will be sent as an email attachment after purchase - please check spam folder if not received.

Trade enquiries welcome - please contact via email: [email protected]

* The product listed is not manufactured by the Original Equipment Manufacturer (“OEM”), unless specifically stated and where reference is made to the brand names of the OEMs, the references are for specification reference only and are not an endorsement by the OEM referred to. All warranties under consumer laws within the European Community Consumer Laws against defects are provided by the Seller.

Write Your Own Review
You're reviewing:1x 12 / 24v White Flush Led Marker Light